Airy3D Announces Support for MediaTek Genio SoCs for Edge 3D Vision Applications
Airy3D announced that its DepthIQTM SDK is supported on the MediaTek Genio Series of System-on-Chips, enabling compact and cost-efficient passive 3D vision solutions for embedded AI vision applications across robotics, industrial, retail, and smart devices.
Read More
Airy3D and Lattice to Showcase Compact, Integrated Humanoid and Robotic 3D Vision Demo at Embedded World 2026
Airy3D announced a joint demonstration with Lattice Semiconductor highlighting a compact and compute-efficient 3D vision solution for humanoids and advanced robotics, which will be on display at Embedded World 2026.
Read More
Smart Eye and Airy3D to Demonstrate Single-Sensor 3D Solution for In-Cabin Monitoring at CES 2026
Smart Eye and Airy3D announced a joint in-cabin monitoring demonstration that will be showcased at CES 2026, at the Smart Eye booth. The live demo highlights how next-generation driver and occupant monitoring can be achieved using a single passive 3D sensor, simplifying system design while maintaining performance under real-world conditions.
Read More
Airy3D Announces the Support of DepthIQ™ for Qualcomm Dragonwing™ RB3 Gen 2 and RB5 Platforms
Airy3D announced that its DepthIQ™ software development kit (SDK) is now supported on the Qualcomm Dragonwing™ RB3 Gen 2 and RB5 platforms. This milestone enables developers and OEMs to easily integrate DepthIQ’s passive depth sensing capabilities into a wide range of intelligent devices powered by Qualcomm Technologies’ industry-leading-edge processors.
Read More
Airy3D’s DepthIQ awarded Product of the Year Award in the Edge AI Camera and Sensors category.
Airy3D’s DepthIQ has been awarded the 2025 Edge AI and Vision Product of the Year Award in the Edge AI Camera and Sensors category.
“On behalf of the entire Airy3D team, we are honored to have been selected as a 2025 Edge AI and Vision Product of the Year winner for our DepthIQ™ 3D sensing solution. Our patented DepthIQ technology empowers customers across many industries to reduce their system size and cost, extend autonomy through lower power consumption, and operate outdoors in challenging light conditions. We are proud to be recognized as an innovator in embedded vision, delivering both 3D and 2D capabilities in the smallest form factor ever” – Chris Barrett, CEO, Airy3D Inc.
The award trophy will be presented at the 2025 Embedded Vision Summit May 20-22 in Santa Clara, CA. The awards program is organized by the Edge AI and Vision Alliance. The Edge AI and Vision Product of the Year Awards celebrate the innovation and achievement of the industry’s leading companies that are enabling and developing products incorporating edge AI and computer vision technologies.
Read More
Seeing Machines Announces a new 3D Camera Technology and their partnership with Airy3D
Seeing Machines unveiled a new 3D camera for in-cabin automotive monitoring, combining RGB, IR, and depth. The solution leverages Airy3D’s DepthIQ™ technology, refined through a four-year collaboration, to deliver advanced 3D vision that meets automotive requirements and future safety standards.
Seeing Machines also released a white paper, "3D Sensing for In-Cabin Monitoring", detailing this leading solution, explaining how DepthIQ emerged as the most suitable technology to address the opportunities and challenges of 3D sensing in the automotive industry. The white paper is available here.
Read More
Valens Semiconductor showcases their latest chipset with AIRY3D technology
Valens Semiconductor's partnered with AIRY3D and Teledyne e2v to demonstrate monocular 3D vision with their latest A-PHY enabled chipsets. The demonstration featured Valens’ VA7000 chipsets connected to Teledyne’s Optimom5D, powered by AIRY3D’s DepthIQ technology. It was showcased at Valens’ booth during the Vision show in Stuttgart in October 2024. Click the link below for the full press release.
Read More
Teledyne e2v and AIRY3D collaboration delivers more affordable 3D vision solutions
AIRY3D is thrilled to announce its partnership with Teledyne E2V, which is culminating in the launch of the Topaz5DTM, a new commercially available sensor powered by AIRY3D’s DepthIQ technology!
The Topaz5D is a low-cost, low power, 2-megapixel global shutter sensor that simultaneously produces high-quality 2D images and 3D depth maps from a single passive device. The sensor is available now for evaluation and design.
Read the full press release here
To learn more about Topaz5D, visit https://imaging.teledyne-e2v.com/products/2d-cmos-image-sensors/topaz5d/.
Read More
AIRY3D recognized as a disruptive 3D solution provider by Yole Group
We are honored to be recognized as a disruptive 3D solution provider by the Yole Group, a well-respected institution in the vision and imaging industry.
“Traditional short-range stereo products usually require high computation resources, bulky modules and are limited by short-range blind zone occlusions. AIRY3D’s proposition is bringing value, resulting in a more compact imaging module going beyond these limitations. In addition, it is ensuring immunity performance versus ambient light that affects near-infrared time-of-flight technology.” Florian Domengie, Senior Technology and Market Analyst, Yole Group.
Read More
AIRY3D joins Edge AI and Vision Alliance
We are delighted to share that AIRY3D has become a member of the Edge AI and Vision Alliance. The Alliance is a worldwide industry partnership bringing together technology providers and end-product companies to accelerate the adoption of edge AI and vision in products.
AIRY3D looks forward to joining events of the alliance and exchanging on 3D vision technology for edge application! To learn more about the alliance, you can visit www.edge-ai-vision.com.
Read More
AIRY3D joins A3 Association
We are pleased to announce that AIRY3D has joined the Association for Advancing Automation. A3 is North America’s largest automation trade association representing more than 1,300 organizations involved in robotics, artificial intelligence, machine vision & imaging, motion control & motors and related automation technologies.
AIRY3D is thrilled to join this community and is looking forward to engaging with the other members. To learn more about A3, visit their website.
Read More
CES 2024 – It’s a Wrap!
CES 2024 was an electrifying journey filled with innovation, collaboration, and endless possibilities! We were thrilled to collaborate with our partner STMicroelectronics, who generously hosted our monocular RGBIR-D demonstration, using their 5.1 MP RGB-NIR image sensor VB1940. The feedback we received was overwhelmingly positive, and the buzz around our partner's pavilion was electric.
Missed our demo? See the Monocular RGBIR-3D in action, courtesy of STMicroelectronics.
Read MoreJoin our newsletter.
Designed for our customer community, your subscription means you will receive the latest technology and applications news, as well as information on our events directly to your inbox.